Short answer: You do not need a Dallas warehouse to buy color-matched edge banding. We ship rolls matched to your panel's decor code from our Chicago warehouse to Dallas, Fort Worth, Arlington and the rest of the DFW area. Read the code on the panel label, check a sample against an offcut, then order from one roll.
This guide is for cabinet shops, closet builders and installers in North Texas who work with branded laminate, TFL and melamine panels.
Key takeaways
- We have no storefront or pickup counter in Texas. Orders ship from 1400 W 37th Street, Chicago, IL 60609.
- Match by the decor code on the panel label, not by a phone photo.
- Check a sample under your shop lighting before you buy production rolls.
- You can start with one roll and reorder the same product page so later doors match the first batch.
- Shipping cost is calculated at checkout. We do not quote a fixed delivery day to Texas.
Where can you buy edge banding in Dallas?
You have two routes: a local lumber yard or distributor, or ordering matched rolls online. Local yards often carry a few generic whites, blacks and woodgrains. They rarely carry a roll matched to the exact decor code on an EGGER, UNIBOARD, TAFISA or Wilsonart panel.
We make matched rolls in our own factory and ship them from Chicago. When a listing says "matched to EGGER" or "matched to Wilsonart", it means the roll was made to pair with that decor. The rolls are our own product, not the panel maker's.
Should you use a local Dallas yard or order from Chicago?
| What you need | Local Dallas-area yard | Order from our Chicago warehouse |
|---|---|---|
| A generic white, gray or black | Often available | Yes, see solid color edge banding |
| A roll matched to a branded decor code | Rarely carried by code | Look up the code in the brand guides below |
| Check the color before a full run | If they let you see a roll | Order a sample first |
| A single roll | Depends on the yard | Yes, one-roll minimum |
| Same-day pickup in Texas | Possible if they carry the color | No; we ship from Chicago |
If your job has a hard install date, contact us before you order the production rolls so you can plan around the shipping time.
How do you match edge banding for a Dallas cabinet job, step by step?
- Copy the label. Write down the brand and the full decor code, including any texture code, for example EGGER U702 ST9. Take a photo of the label and the panel edge.
- Open the brand guide. Use the EGGER, UNIBOARD, Wilsonart or TAFISA matching guide.
- Shortlist one or two rolls. For example, the roll matched to EGGER U702 ST9 Cashmere Grey if that code is on your board. For a wood look with no code, start with wood grain edge banding.
- Check a sample. Hold it on an offcut near a window and again under your shop lights.
- Size the order. Use how much edge banding do I need for footage and how to choose edge banding width for the Size option.
- Order one roll, then reorder the same product. Reordering the same product page keeps the color consistent as the job grows.
What should you order first?
| What you know | Where to start |
|---|---|
| A branded panel code | That brand's matching guide, then a sample |
| A white panel with no code | The white edge banding guide |
| A solid color with no code | The solid color edge banding guide |
| A woodgrain with no code | The wood grain edge banding guide |
| Veneered plywood | Real wood veneer: 0.5 mm with glue on the back, applied with an iron. See how to iron on wood veneer edge banding |
| A full job list | The edge banding supplies checklist |
Frequently asked questions
Do you have a warehouse or pickup point in Dallas?
No. We ship from our Chicago warehouse at 1400 W 37th Street, Chicago, IL 60609.
Do you ship to Fort Worth and Arlington, Texas?
Yes. We ship across the Dallas-Fort Worth area from Chicago.
I searched "edge banding Arlington". Is that Texas or Illinois?
This guide covers Arlington, Texas. For Arlington Heights, Illinois, see our Chicago edge banding supplier guide.
How long does shipping to Dallas take?
We do not publish a fixed transit time to Texas. Shipping is calculated at checkout; call us if the job has a hard date.
How much does shipping cost?
It is calculated at checkout based on the order.
Can I order just one roll?
Yes. There is a one-roll minimum.
Do you match EGGER, UNIBOARD, TAFISA and Wilsonart panels?
Yes, by decor code. Find yours in the brand guides linked above.
Are your rolls made by those panel brands?
No. We make the rolls and match them to the panel decor. Brand names only identify the panel.
Why should I order by decor code?
Color names repeat across brands and collections. The code points to one exact decor.
Can I match a panel from a phone photo?
Not reliably. Phone screens shift warm and cool tones. Use the code and a physical sample.
How do I keep later orders the same color?
Reorder from the same product page you used for the first roll.
Can I get a sample first?
Yes. Order samples here. Free samples; shipping is calculated at checkout.
Who is CT Edge Band?
CT Edge Band Supply, Inc makes matched edge banding in our own factory and ships rolls from our warehouse at 1400 W 37th Street, Chicago, IL 60609. You can order a single roll, and shipping is calculated at checkout. Brand names on our listings (EGGER, Wilsonart, ARAUCO PRISM, TAFISA and others) only tell you which panel a roll is matched to; the rolls are our own product.
Questions about a match or a size? Call +1 312-612-0281 or +1 312-612-0284, or email Order@ctedgeband.com. We answer Monday to Saturday, 9am to 8pm EST.
Next step: order a sample of the roll you have in mind and hold it against your panel before you buy rolls. Free samples; shipping is calculated at checkout.
