The quickest way to find EGGER edge banding that truly matches is to use the board's full decor code plus its texture code, for example U702 PM rather than just "Cashmere Grey." Both parts matter: the decor code sets the color or pattern, and the texture code sets the sheen and feel you see along the edge. Look the code up in a pre-matched range, then check a physical sample against your actual board before you run production.
This guide explains how EGGER codes work, which textures change the look of an edge, and the step-by-step process our team recommends to cabinet shops, furniture makers and DIY builders.
Key takeaways
- An EGGER decor is identified by a letter + number (such as W960, U727, H1386 or F416) followed by a texture code (such as ST7, ST9, ST10, ST40 or PM).
- The same decor can come in several textures. Match both codes, not just the color name.
- Texture changes sheen. A matte edge on a high-sheen face (or the reverse) is often what makes an "exact" color look wrong.
- Always compare a physical sample against the real board in daylight. EGGER itself notes that color-matching selections are only possible on the original sample.
- CT Edge Band offers a dedicated EGGER-matched edge banding collection, and free samples so you can confirm the match first.
What does an EGGER decor code mean?
Every EGGER decor carries a short code. In the EGGER range, the leading letter tells you the decor family and the number identifies the specific design. Here is how the codes in our own EGGER-matched range break down:
| Prefix | Decor family | Examples we match |
|---|---|---|
| W | Whites | W960 Classic White, W1100 Alpine White, W1000 Premium White |
| U | Uni (solid) colors | U727 Stone Grey, U702 Cashmere Grey, U999 Black, U502 Misty Blue |
| H | Woodgrains | H1386 Brown Casella Oak, H1180 Natural Halifax Oak, H3790 Honey Carini Walnut |
| F | Material looks (textile, linen, metallic and similar) | F416 Beige Textile, F433 Anthracite Linen, F638 Chromix Silver |
A decor name on its own can be ambiguous. Several EGGER decors share words like "grey," "oak" or "white," so the number is what pins down the exact design.
What do EGGER texture codes like ST9, ST10 and PM mean?
The second half of the code describes the surface texture. EGGER publishes descriptions of its textures on its official textures and surfaces page. In short:
| Texture code | EGGER name | What it looks and feels like |
|---|---|---|
| ST7 | Smoothtouch Fine Pearl | A neutral, usable, rather matte surface |
| ST9 | Smoothtouch Matt | A neutral, velvety-matte feel on solid, wood and material decors |
| ST10 | Deepskin Rough | A reserved, continuously matte rough feel, mainly for woodgrain and textile decors |
| ST12 | Omnipore Matt | An all-over wood pore texture with a light velvet touch |
| ST19 | Deepskin Excellent | Matte and glossy grain areas that give a lively, natural woodgrain look |
| ST22 | Deepskin Linear | A brushed, linear grain feel suited to conifer-style decors |
| ST37 | Feelwood Rift | A deep, synchronized texture made for the Halifax Oak decor series |
| ST40 | Feelwood Oakgrain | A matte-in-matte synchronized pore made for the Casella Oak decor series |
| PM | PerfectSense Matt (lacquered) | A smooth, velvety-matte lacquered surface with anti-fingerprint properties |
Not every texture is available for every decor, which is another reason to read the code straight from your board, spec sheet or order paperwork.
Why does the texture code matter for edge banding?
Because the same color can look different under a different finish. Light reflects off a deep-pored ST40 woodgrain very differently than off a smooth PM lacquer, so an edge that matches the color but not the sheen will stand out at the corner.
You can see this in our own range. We make separate edge banding SKUs for the same EGGER decor in different textures, for example:
- U702 Cashmere Grey in ST9 Smoothtouch Matt and in PM PerfectSense Matt
- U999 Black in ST7, ST19 and PM versions
- W1100 Alpine White in ST9, ST19 and PM versions
If your panel is U702 PM, pick the PM edge. Choosing the ST9 version because the color name matches is one of the most common reasons for a "close but not quite" result. For more on sheen, see our guide to matching edge banding with matte, gloss and soft-touch panels.
How do you match edge banding to an EGGER board, step by step?
Follow this process before you commit to a full run:
- Find the full code. Check the board label, the supplier's quote or invoice, or the project spec sheet. Write down both the decor code and the texture code (for example H1386 ST40).
- Search by code, not by name. Look up the code in our EGGER collection. Each CT roll is named for the EGGER decor and texture it is designed to match, plus a CT reference number.
- Confirm the size. Our EGGER-matched rolls are listed in 1mm thickness in widths such as 23mm (328 ft rolls) and 72mm (300 ft rolls); a few whites also come in other sizes. Check the product page for the sizes available for your decor, and use our edge banding width guide if you are unsure.
- Order a sample. Request a free sample of the decor you picked.
- Compare in the right light. Hold the sample against the board face and along a cut edge, in daylight and under the lighting the furniture will live in. Look at color, grain direction and sheen from a few angles.
- Run a test piece. Band an offcut on your own edge bander with your usual hot melt adhesive, then trim and scrape it. The finished edge is the real test.
How do woodgrain and textile decors change the match?
Solid colors are mostly about color and sheen. Woodgrains and material looks add pattern, so keep these points in mind:
- Woodgrains (H codes). Check the grain direction on the panel and run the edge the same way. Synchronized textures such as ST37 Halifax Oak and ST40 Casella Oak have deep, distinctive pores, so match the exact decor, for example H1386 ST40 Brown Casella Oak.
- Material decors (F codes). Textile and linen decors such as F416 ST10 Beige Textile rely on a fine surface pattern. Compare the sample up close, because a small strip shows less of the pattern than a full board.
- Whites (W codes). Whites look alike until they sit side by side. W960 Classic White and W1100 Alpine White are different decors, so confirm the number. Our W960 ST7 Classic White is one of the EGGER codes shoppers search for most on our site.
Which EGGER decors are in the CT range?
Our EGGER collection currently lists dozens of pre-matched decors across all four families. A few groups that cabinet and furniture makers often ask about:
| Group | Decors in our range (examples) |
|---|---|
| Whites | W960 ST7 Classic White, W1050 ST7 Coastal White, W1100 Alpine White (ST9, ST19, PM) |
| Greys | U727 ST9 Stone Grey, U779 ST7 Fog Grey, U705 ST9 Angora Grey, U767 ST9 Cubanit Grey |
| Oaks | H1384 / H1385 / H1386 Casella Oak (ST40), H1176 / H1180 / H3180 / H1181 Halifax Oak (ST37) |
| Walnuts | H3710 / H3790 / H3791 / H3794 Carini Walnut (ST12), H1714 ST19 Lincoln Walnut |
| Textiles | F416 ST10 Beige Textile, F417 ST10 Grey Textile, F422 ST10 White Linen |
The range changes over time, so treat the collection page as the source of truth.
What if your EGGER decor isn't listed?
Not every EGGER decor and texture combination is in our range. If you can't find yours:
- Search by the decor number only (for example "H1180") in case the texture differs from what you expected.
- Check whether a related decor in the same family is close enough for your project, and confirm it with a sample.
- Contact our team with the full code and, if possible, a photo of the board. We will tell you honestly whether we have a suitable match.
Why buy EGGER-matched edge banding from CT?
CT Edge Band is an independent manufacturer that makes its own edge banding designed to match popular panel brands, including EGGER. What that means for you:
- Code-based naming. Each roll lists the EGGER decor and texture it is designed to match, so ordering is less guesswork.
- Made for production and small shops. Our EGGER-matched rolls are made for automatic and manual edge banders and are applied with hot melt adhesive.
- Try before you commit. Samples are free (you only pay shipping) and ship from our warehouse in Chicago, IL, typically arriving in 3–5 days.
Frequently asked questions
Is CT edge banding made by EGGER?
No. CT Edge Band manufactures its own edge banding. EGGER names and decor codes are used only to show which EGGER boards each CT product is designed to match.
Do I need to match the texture code, or is the decor code enough?
Match both. The decor code sets the color or pattern; the texture code sets the sheen and feel. The same decor in a different texture can look noticeably different along an edge.
Where do I find the EGGER code on my board?
Check the label on the board or pallet, your supplier's quote or invoice, or the project specification. If you only have an offcut, ask the supplier who sold you the board.
Can I get a sample before ordering a full roll?
Yes. Order from our free samples page; you only pay shipping. Compare the sample with your board in daylight before placing a production order.
Which edge banding width should I order for EGGER panels?
Pick a width slightly wider than your panel thickness so the edge can be trimmed flush. Product pages show the widths available for each decor, and our width guide explains the rule of thumb.
Ready to match your EGGER boards?
Browse the EGGER-matched edge banding collection, then order free samples to check color, texture and sheen against your own panels. Have a code you can't find? Send it to our team.
CT Edge Band is not affiliated with EGGER. EGGER and decor names are trademarks of their respective owner and are used here only to identify compatible board decors.
