Short answer: textile edge banding is a fabric-look or linen-look roll used to match panels with a woven, textile or chromix surface. Read the decor code on the board (for example EGGER F416 or Wilsonart 4942-38), stay in the same fabric family as the face, then confirm with a free sample before you order full rolls.
Key takeaways
- Textile / linen / chromix edges are for fabric-look and metal-weave panel faces — not for plain solid colors or ordinary woodgrain planks.
- Match the panel decor code first (EGGER F-codes, Wilsonart laminate numbers, ARAUCO PRISM AF codes).
- Screens flatten weave detail; a free sample next to a board offcut is the only reliable check.
- We list in-stock textile, linen and chromix matches below. Brand names mean matched to that decor, not brand ownership of the edge.
- Free samples; shipping is calculated at checkout.
What is textile edge banding used for?
Textile edge banding finishes the exposed edge when the cabinet or furniture face is a fabric-look, linen-look or chromix metal-weave panel. The weave or linen texture has to continue onto the edge, or the door looks unfinished next to a flat solid strip.
In our catalog these rolls are matched to EGGER textile and linen decors (F-codes with ST10), Wilsonart Crisp Linen, and ARAUCO PRISM Natural Linen. Related chromix metal looks are included here because shops often search them with the same “textile edge banding” intent.
For ordinary woodgrain faces, use the wood grain edge banding guide instead. For soft-touch solids, see the soft touch edge banding guide.
How do you match textile edge banding to a panel?
- Read the decor code on the board label or laminate chip (for example F416 ST10 or 4942-38).
- Note the surface family — textile weave, linen weave, or chromix metal look.
- Find the matched roll in the table below or in the EGGER, Wilsonart or PRISM collection.
- Keep texture in the same family as the face. A smooth solid edge on a woven face is easy to spot.
- Order a free sample, compare it with a board offcut under job-site light, then order full rolls.
How is textile edge banding different from wood grain or solid color?
| Family | Look on the edge | Best paired with | Shop |
|---|---|---|---|
| Textile / linen / chromix | Woven fabric, linen or metal-weave texture | Fabric-look and chromix panel faces | This guide · EGGER |
| Wood grain | Plank figure (oak, walnut, maple) | Woodgrain TFL / laminate faces | Wood grain · guide |
| Solid color | Flat color, no weave | Flat solid panels | Solid color · guide |
| Soft touch | Velvet-like low sheen | Soft-touch / super-matte faces | Soft touch · guide |
| High gloss | Mirror-like shine | High-gloss doors | High gloss · guide |
Which textile and linen codes can you start with?
Representative in-stock matches. Click through to the product page. We skipped any SKU still on our internal mismatch checklist.
| Group | Look | Matched-to decor | Product |
|---|---|---|---|
| EGGER textile / linen (ST10) | |||
| Beige textile | Light sandy beige with a fine linen-like weave | EGGER F416 ST10 Beige Textile | View roll |
| Grey textile | Cool grey with a fine woven texture | EGGER F417 ST10 Grey Textile | View roll |
| Anthracite linen | Dark charcoal linen weave | EGGER F433 ST10 Anthracite Linen | View roll |
| EGGER chromix (metal weave) | |||
| White chromix | Bright white with a fine metal-weave look | EGGER F637 ST10 White Chromix | View roll |
| Chromix silver | Cool silver metal-weave look | EGGER F638 ST10 Chromix Silver | View roll |
| Wilsonart & ARAUCO PRISM linen | |||
| Crisp Linen | Light off-white linen texture | Wilsonart Crisp Linen 4942-38 | View roll |
| Natural Linen | Warm natural linen look | ARAUCO PRISM AF232 Natural Linen | View roll |
How do you choose the right textile edge banding?
- Confirm the face is a fabric-look, linen or chromix surface (not a plain solid or oak plank).
- Search the exact decor code in EGGER, Wilsonart or PRISM.
- If you only know the brand, open that brand’s matching guide — EGGER, Wilsonart, ARAUCO PRISM — then return to the textile rolls above.
- Do not substitute a smooth solid white for a linen white unless the design calls for a contrast edge.
- Order free edge banding samples; shipping is calculated at checkout. Compare against a board offcut, then buy full rolls.
FAQ: textile edge banding
What is textile edge banding?
It is edge banding with a woven fabric, linen or chromix metal-weave surface made to sit next to fabric-look panel faces so the edge texture matches the door.
Can I use wood grain edge banding on a textile panel?
Usually not. A plank figure next to a woven face is easy to see. Stay in the textile / linen / chromix family and verify with a sample.
Is chromix the same as textile?
Chromix is a metal-weave look in the same EGGER F-code / ST10 family. Shops often search it with textile edge banding, so we list White Chromix and Chromix Silver here for matching.
Do brand names on the product mean the edge is made by that brand?
No. We write “matched to” for the panel decor. The edge banding is supplied by us to pair with that look.
How should I confirm color and weave before ordering full rolls?
Order free samples (shipping is calculated at checkout), hold them against a board offcut under the same light as the install, then order coils.
Get free textile edge banding samples
Ready to check weave and color? Order free edge banding samples or browse the samples collection, then pick full rolls from the EGGER, Wilsonart or PRISM matches above once the texture looks right.
