Short answer: to match edge banding to SHINNOKI panels, pick the matching decor by name, compare the overall tone of the panel rather than one streak of grain, and keep the edge low in sheen because SHINNOKI boards have a matte lacquer. For a 3/4" panel, a 15/16" wide band leaves a little to trim. Check a free sample against your actual board before you order rolls.
Key takeaways
- SHINNOKI panels are real wood veneer with a mixed grain, so no two sheets look exactly alike.
- Match the average tone of the sheet, not the lightest or darkest leaf.
- The panels have a matte or semi-matte finish, so a shiny edge will stand out.
- We carry 18 edge banding matches for SHINNOKI decors, from pale oaks to near-black.
- Always hold a sample against the board in the room where it will be installed.
What makes SHINNOKI panels hard to match?
SHINNOKI is a range of prefinished real wood veneer panels made by Decospan. According to the Decospan SHINNOKI panel overview, the veneer is laid in a mixmatch pattern on an MDF core and finished with six coats of UV lacquer in a matte or semi-matte sheen.
That mix of leaves is the challenge. One part of a sheet can look lighter or show more grain than the part next to it. A printed edge band has one steady pattern, so the goal is a band that blends with the whole sheet from normal viewing distance.
Which SHINNOKI decors do we match, grouped by tone?
Group the decors by tone first. It makes it easier to narrow down two or three candidates before you order samples.
| Tone group | SHINNOKI decors we match | What to compare first |
|---|---|---|
| Pale oaks | Milk Oak, Bondi Oak, Ivory Oak, Ivory Infinite Oak | Whether the panel leans white, grey or tan |
| Golden oaks | Natural Oak, Sahara Oak | How warm or olive the gold looks |
| Grey and greige | Desert Oak, Manhattan Oak, Pebble Triba | Brown versus green undertone, and grain contrast |
| Walnuts | Pure Walnut, Frozen Walnut, Smoked Walnut, Stardust Walnut | How dark the base is and how visible the grain stays |
| Deep browns | Terra Sapele, Cinnamon Triba | Red versus chocolate undertone |
| Near-black | Burley Oak, Raven Oak, Shadow Eucalyptus | Whether any brown shows through in daylight |
You can see every match in one place on our SHINNOKI edge banding collection.
How do you match edge banding to SHINNOKI panels step by step?
- Find the decor name. Check the panel label, order or spec sheet for the SHINNOKI decor name, such as Natural Oak or Smoked Walnut.
- Open the matching product. Use the table above or the collection page to find the edge banding listed for that decor.
- Measure the panel thickness. A 3/4" panel takes a 15/16" (about 23 mm) band, which leaves a small overhang to trim flush.
- Order a free sample. Request it from our free wood grain samples page.
- Compare in real light. Hold the sample against two or three spots on the sheet, near a window and under the room lights.
- Order the rolls. Once the sample blends from a normal viewing distance, order enough length for every exposed edge plus some extra.
How do you choose between two close SHINNOKI matches?
Several decors sit close together, especially the pale oaks, the walnuts and the near-black group. When two samples both look right, use these checks:
- Undertone: lay both samples on the sheet and see which one shares its grey, gold or red cast.
- Darkness: squint at the sheet from a few steps back. The sample that disappears is usually the better match.
- Grain contrast: a sheet with strong dark lines needs a band with visible grain, while a calm sheet looks best with a quieter band.
- Sheen: look at the edge at an angle. It should not shine more than the panel face.
- Where the edge shows: doors and drawer fronts get the closest look, so test samples against those parts first.
Frequently asked questions
Is this edge banding made by Decospan?
No. CT Edge Band makes the edge banding and matches it to SHINNOKI decors. SHINNOKI is a Decospan product.
What width do I need for a 3/4" SHINNOKI panel?
Order 15/16" (about 23 mm). It is a little wider than the panel, so you can trim it flush after it is applied.
Why does my sample look different from one part of the sheet?
SHINNOKI uses real veneer in a mixed pattern, so tone and grain change across the sheet. Compare the sample with several spots and judge the overall look.
Can I use SHINNOKI panels on kitchen countertops?
Decospan does not recommend SHINNOKI panels for horizontal surfaces in kitchens, bathrooms or other humid areas. Check the maker's guidance before you plan the job.
Ready to match your SHINNOKI project?
Browse the SHINNOKI matches, order a free sample, or contact our team with your decor name and we will point you to the closest match.
