Short answer: to match edge banding to AGT panels, order by the four-digit code or P code on your board label, such as 3019 or P734, not by the color name alone. Most AGT decors we match are soft touch or super matte (AGT calls its super matte surface Supramat), so the edge has to match the low sheen as well as the color. Find your code in the table below and check a free sample against an offcut before you order rolls.
Key takeaways
- The AGT code (for example 3020 or P601) is the most reliable way to find the right roll.
- Most AGT matches in our range are matte soft touch decors; P601 High Gloss White is the gloss exception.
- Some decors carry a Turkish name too, such as Beyaz (white), Sahara Krem or Safari Gri. They are the same decor.
- We list 16 AGT matches below, from white and cream to greys, charcoals and greens.
- Always compare a physical sample with your board in the light where it will be installed.
What makes AGT panels hard to match?
AGT is a Turkish panel maker whose soft touch boards are popular for modern cabinet fronts. Those boards have a deep, flat matte face, so a shiny edge shows on every door, and a near miss in tone is easy to spot on a long run of drawers.
Many AGT colors are also close to each other. Ice Grey, Safari Grey, Timeless Grey, Pebble Grey and Royal Grey all sit in the grey range, and Snow White, Breeze Beige and Sahara Cream are all pale. That is why the code matters more than the name or a photo.
Which AGT codes can you order from us?
Find the code from your board label, click the name, and you land on the roll matched to that decor. The look column describes the product photo, so treat it as a guide and confirm with a sample.
| AGT code | Decor name (links to the matching roll) | Look | Our SKU |
|---|---|---|---|
| Whites and creams | |||
| AGT P601 | High Gloss White (Beyaz) | Clean white, high gloss | CT20001M |
| AGT P734 | Matte Soft Touch White (Beyaz) | Pure white, matte soft touch | CT20002M |
| AGT 3012 | Snow White | Snow white, matte soft touch | CT20016M |
| AGT 3013 | Breeze Beige | Pale beige, low sheen | CT20007M |
| AGT 3019 | Sahara Cream (Sahara Krem) Supramat | Pale cream, super matte | CT20004M |
| Greys | |||
| AGT 3021 | Ice Grey | Light cool grey, low sheen | CT20010M |
| AGT 3020 | Safari Grey (Safari Gri) Supramat | Neutral light-to-mid grey, super matte | CT20005M |
| AGT 3017 | Timeless Grey | Cool mid grey, faint fine lines | CT20017M |
| AGT P729 | P729 | Warm grey with a soft olive cast, matte | CT20018M |
| AGT 3024 | Pebble Grey | Slate grey, matte | CT20014M |
| AGT 3022 | Royal Grey | Dark slate grey, matte | CT20015M |
| Charcoals and blacks | |||
| AGT 3025 | Bitter | Deep charcoal close to black, faint fine lines | CT20006M |
| AGT 3010 | Pearl Black | Charcoal black, soft touch | CT20013M |
| Greens and teals | |||
| AGT 3015 | Macaron Green | Soft sage green, matte | CT20012M |
| AGT 3027 | Forest Green | Muted dark grey-green, matte | CT20008M |
| AGT 3029 | Glamorous Pacific | Deep dark teal, matte | CT20009M |
AGT 3011 London Blue is not in this table while we check its product details. You can still find it in the AGT edge banding collection, and we are happy to confirm a code before you order.
How do you match edge banding to an AGT panel, step by step?
- Read the code. Take the number (such as 3024) or P code (such as P729) from the board label, invoice or spec sheet.
- Find it in the table above. Open the product page and check that the code and name match your paperwork.
- Check the finish. A soft touch or Supramat door needs a matte edge; P601 High Gloss White needs the gloss roll.
- Check the width. For a 3/4" panel, a 15/16" (about 23 mm) band leaves a little to trim flush. Confirm the sizes listed on the product page.
- Order a free sample. Request it from our free sample page.
- Compare in two kinds of light. Hold the sample on the panel near a window and under room lights, and tilt it to check the sheen.
How do you choose between two close AGT matches?
- Sheen: tilt the door toward a light. The edge should look as flat as the face, no shinier.
- Undertone: greys and whites lean warm or cool. P729 has a soft olive cast, while Ice Grey reads cool, so lay both samples on the board and see which shares its cast.
- Depth: for dark decors, Bitter 3025 reads as deep charcoal and Pearl Black 3010 as charcoal black; check them against the board, not each other.
- Where it shows: test against doors and drawer fronts first, since they get the closest look.
For more on low-sheen edges, see our guide to matching matte, gloss and soft touch panels. For the gloss white, see how to match glossy cabinet panels.
Frequently asked questions
Is this edge banding made by AGT?
No. CT Edge Band makes the edge banding and matches it to AGT decors. AGT is the panel brand.
Are Sahara Cream and Sahara Krem the same decor?
Yes. Both names refer to AGT 3019, and the same goes for Safari Grey and Safari Gri (3020). Order by the code and you get the same roll.
What width do I need for a 3/4" AGT panel?
Order 15/16" (about 23 mm), which is a little wider than the panel so you can trim it flush. Check each product page for the sizes listed for that decor.
Why does the product photo look different from my board?
Screens and photos change color and sheen, and boards can vary a little between production lots. Judge the match from a physical sample next to the board.
Ready to match your AGT project?
Find your code above and order a free sample, or contact our team with your AGT code and we will point you to the match.
