The Cabinet Maker's Q&A Handbook
Edge Banding Handbook
Plain answers on panels, edge banding, color matching and fixing edge problems.
- 4 answers
- 8 chapters
- For cabinet shops, makers & DIYers
Start with your question
Pick a chapter to see the answers that fit your stage of the job.
How to use the handbook
Follow the job, from panel to order
Each step points to the chapter with the answers for that stage.
- Step 1 Choose panels Laminate, TFL, HPL or veneer
- Step 2 Pick edge banding Material, thickness and width
- Step 3 Match color Match your panel decor
- Step 4 Cut & edge Edge by hand or machine
- Step 5 Glue & machines EVA vs PUR and bander type
- Step 6 Install hardware Hinges, slides and site install
- Step 7 Fix problems Peeling, bubbling, gaps
- Step 8 Order Samples, rolls and storage
Tagged: Hardware & Installation
-
Hardware & install
How to Repair Chipped or Lifting Edge Banding On Site
How to sort and fix edge banding damaged during installation: re-bond lifted edges, fill small chips, replace cracked sections.
Read answer › -
Hardware & install
How to Protect Edge Banding From Shop to Install
Simple habits that protect edge banding during assembly, storage, shipping and on-site installation, plus safe cleaning for PVC and ABS.
Read answer › -
Hardware & install
Drawer Slide Clearance and Edge Banding Thickness
Where edge band thickness adds up on drawer boxes and fronts, and how to plan cut sizes so slides run smoothly and...
Read answer › -
Hardware & install
How to Drill Hinge Cups Without Chipping Edge Banding
Why edge banding chips when you drill concealed hinge cups, where the cup should sit, and a step-by-step setup for clean holes.
Read answer ›
No answers in this chapter yet. Ask us and we will point you to the right edge banding.
Ask our teamCan't find your answer?
Tell us your panel brand, decor code and how you apply the edge. We will help you pick the right edge banding, or send a sample to test first.
