The Cabinet Maker's Q&A Handbook
Edge Banding Handbook
Plain answers on panels, edge banding, color matching and fixing edge problems.
- 3 answers
- 8 chapters
- For cabinet shops, makers & DIYers
Start with your question
Pick a chapter to see the answers that fit your stage of the job.
How to use the handbook
Follow the job, from panel to order
Each step points to the chapter with the answers for that stage.
- Step 1 Choose panels Laminate, TFL, HPL or veneer
- Step 2 Pick edge banding Material, thickness and width
- Step 3 Match color Match your panel decor
- Step 4 Cut & edge Edge by hand or machine
- Step 5 Glue & machines EVA vs PUR and bander type
- Step 6 Install hardware Hinges, slides and site install
- Step 7 Fix problems Peeling, bubbling, gaps
- Step 8 Order Samples, rolls and storage
Tagged: Edge Banding Basics
-
How to Edge Band Corners: Outside, Inside and Rounded
How to band outside, inside, rounded and mitered corners, which edge to band first, and how to finish corners so they stay...
Read answer › -
Edge Banding Gap Filler: How to Fix Gaps the Right Way
When a color-matched filler is enough for a gap in edge banding, when to re-band instead, and how to keep gaps from...
Read answer › -
How Much Edge Banding Do I Need? A Simple Way to Calculate It
Add up every visible edge, allow about 2 inches per edge for trimming plus 10% extra, then divide by 300 ft rolls....
Read answer ›
No answers in this chapter yet. Ask us and we will point you to the right edge banding.
Ask our teamCan't find your answer?
Tell us your panel brand, decor code and how you apply the edge. We will help you pick the right edge banding, or send a sample to test first.
